In automatic mode it usually starts after incorrect termination operation or exposure to viruses that cause critical errors. However, quite often you can observe a situation when the message “Preparing automatic recovery” of Windows 10 appears on the screen, and after a reboot, instead of starting the system, only a black screen is visible, or the recovery simply goes in a loop (the same window is displayed at each restart).

The sad thing is that no matter how hard you try, it may be impossible to complete this process. However, if the system itself, not to mention the backup copies, has not been damaged to the most extreme extent, when nothing except re-installation helps, several methods for eliminating this situation can still be proposed.

Preparing automatic recovery for Windows 10: black screen and reasons for the process to loop.

Be that as it may, despite all the statements of the developers that the new system is almost the most stable, alas, it also contains many errors that are constantly being corrected. And system failures are not always eliminated by a regular rollback.

If speak about possible reasons With such behavior in Windows 10, it is certainly quite difficult to say what exactly is causing such a failure. However, with a certain degree of probability the following can be distinguished:

• damage to backups;
• absence system files;
• lack of storage space control points with images;
• incorrect settings of the primary BIOS/UEFI system;
• problems with hard drive and RAM.

Preparing automatic recovery for Windows 10: what to do first?

First, let's look at the standard scheme of actions. If, after a notification appears that automatic recovery of Windows 10 is being prepared, nothing happens after the restart, you can try to use safe mode to start.

If the user has activated the assignment of the F8 key to call the start menu, the standard option is to select safe mode with loading network drivers. If the use of this key is not provided, which is most often the case, it is quite possible that at the boot stage a window will appear with a choice of either booting the system or diagnostic tools (if there are Anniversary and Creators upgrades.

If the system somehow boots, you can try to rollback manually:

1. To do this, you should not use the standard “Recovery Center”; it is better to use the command console, in which you enter the line rstrui.exe.
2. In the rollback window, you must select the point that preceded the occurrence of such a situation. Please note that it will not be possible to stop this process, nor will it be possible to undo changes made during the rollback process.

Sometimes, if the network drivers are loaded and there is an active Internet connection, you can try to perform an online repair using the DISM tool. It may very well be that such a solution will be much more effective.

Using installation media

If a message appears on the screen again stating that automatic recovery is being prepared and this process is in a loop, you must use installation disk or a USB drive, having previously set it first in the list of boot devices in the BIOS.

• In the initial installation prompt window, you must select the system restore hyperlink in the lower left corner.
• Go to the diagnostics section, then apply a rollback.

But you should not use startup recovery, since in most cases you will receive a message stating that the computer is in the initial state failed to return.

After selecting normal recovery, the standard rollback procedure starts. It is quite possible that this method will produce results.

Expansion of reserved space

Another point when the Windows 10 “Preparing automatic recovery” screen appears, but then the system does not show any signs of life, is due to the fact that you need to increase the disk space allocated for saving backup copies. Again, this only applies to situations where Windows can be booted in Safe Mode.

In this case the best option You will be able to use a small and fairly simple Partition Wizard program from MiniTool or a similar development with a built-in bootloader, which is much preferable for cases when the system does not start at all. In it you just need to increase the required space to at least 250 MB (it is better to set a slightly higher value), and then try to boot the system in normal mode.

BIOS/UEFI Settings

Finally, the loopiness of the “Preparing automatic recovery” process in Windows 10 may be associated with the settings of the primary system, which involve deactivating the system of protection against hacker attacks at the hardware level (prohibiting the execution of executable codes). The loop appears for this reason.

Thus, to correct the situation, you need to:

1. When you turn on your computer or laptop, enter the above parameters.
2. Find a line like No-Execute Memory Protect or XD-bit and set it to Enabled.
3. After this, you need to save the changes (F10) and restart the computer device.

Hard drives and RAM

If the problem is in the computer hardware, it may well be that first you should check the disk by booting from removable media using the command line, in which the command chkdsk /x/f/r is written, and at the same time use a check of the main system components (sfc /scannow).

If it is possible to make a safe start, the Victoria (for hard drive) and Memtest+ (for random access memory). In some cases, if HDD began, as they say, to “crumble,” as it is stated, the magnetization reversal program can provide invaluable assistance. How much this application It’s hard to say whether it’s effective, but judging by the reviews, some hard drives can sometimes be restored this way.

Conclusion

As you can already see, it is sometimes possible to remove the constant cyclical appearance of the message that Windows 10 is preparing an automatic recovery. True, in some cases you shouldn’t really count on system tools. But if none of the above helps at all, the system will have to be reinstalled (and in some cases even the hardware changed).

In general, based on purely practical considerations, the first thing to do is to try to boot with a safe start and perform further actions in a somewhat working system. But booting with network drivers is mandatory.

In the event that this option turns out to be completely unworkable, you will have to boot from removable media and try to restore it in this way.

The final click will start the procedure Windows rollback 10. After successful completion, the system will start in normal mode.

A few important points regarding recovery using this method:

• Stop a process running via the console in safe mode impossible;
• Changes that have taken effect cannot be undone;
• After the rollback is complete, the following will appear on the desktop: Text Document, which will describe all affected (deleted) files. The names are presented in the form of links, by clicking on which you can quickly restore lost data.

If a black screen or eternal preparation for automatic system recovery does not allow you to enter the computer’s safe mode, then proceed to a system rollback using the BIOS tool.

Restoring Windows 10 via BIOS

It’s worth mentioning right away that this method can only be implemented if the user has a disk or flash drive with a licensed distribution operating system, otherwise you can skip the option.

The first step is to configure the BIOS to read the disk when the computer starts. For this:

BIOS is configured. Now you just need to insert the external device on which the distribution is stored.

Helpful tips when working with the environment:

• You can find the correct key to enter the BIOS in the instructions for your computer or on the manufacturer’s website. Most modern PC models use the Delete button;
• On laptops, the key combination ctrl+alt+esc can be used to enter the BIOS;
• In addition to the standard Boot, the 1st Boot Device section can be located in “Boot Device” or “Boot Device configuration”.

Now directly restore Windows 10. After the external device has been inserted and the computer is started, a window will appear in which, instead of “Install,” click “System Restore” at the bottom left of the screen:

An action selection window will appear in which you need to select the diagnostic section:

It is worth noting such a tool as “Startup Recovery”. This feature initiates a scan of your computer for errors and corrects them when detected. You can try to run the utility, but you should not rely on it. In most cases, after a short search, you will receive a message stating that the computer could not be restored.

If the BIOS fails to start

Situations when, when the preparation process freezes, automatic update It is impossible to enter the BIOS; they occur quite often. Many users do not understand what to do in such a situation, but there is a solution - resetting (zeroing) the BIOS environment.

There are three relatively simple and safe way reset:

After using any of the methods, the user will be able to enter the BIOS and configure it to perform a Windows 10 recovery.

Hard drive problems

The error that Windows 10 does not load correctly may be due to glitches or critical errors on your hard drive. It is impossible to solve this without purchasing or repairing a hard drive, but it is impossible to determine the presence of problems without a complete Windows startup 10 is still possible.

In the right corner you can see values ​​like 5ms, 20ms, etc. They represent the period of access to each sector hard drive. The ideal value would be 5ms and the more such sectors, the better.

Each of us must have faced the unexpected. system malfunctions and the need to restore it.

In some cases, this measure may be useless, since the root cause of the problem was damage to equipment such as a hard drive or other hardware. However, the last installed data inevitably disappears from the logical partitions.

Can you influence the outcome and get back lost files? Easily! In this article we will look at how you can cancel the restoration of the operating system. Windows systems 7, 8 10 without losing files.

Regardless of the version of OS you are using, there is a list important information you need to know:

• Before you proceed to undo System Restore, do backup files.
• System Restore cannot be canceled if you performed it in Safe Mode.
• Canceling a system recovery cannot be done if you have used the System Recovery Options utility.

As you probably know, this process does not affect data located in user folder(documents, music, downloads, etc.). Only drivers, applications and the latest installed updates are removed.

Useful articles

However, to avoid unexpected loss of important files, we recommend backing them up to an external device. This could be an SD card, Flash drive or DVD.

Step two

Cancel System Restore. The process is quite simple, but for each version of the operating system it has some features.

For Windows 10 users

1. To quickly restart in the above mode, we recommend creating a shortcut Advanced Startup, specifying the following path in it:

shutdown.exe /r /o /f /t 0

2. Turn on your computer in advanced startup mode and go to the menu Troubleshooting.

3. Open the parameter Extra options.

4. Go to menu System Restore and wait for the system to restart.

5. A welcome window will appear in which you will need to select a username and enter a password for your Microsoft account.

6. The next window displays a list of recently completed transactions. Before you begin canceling the recovery, we recommend running .

Select the desired operation (the “cancel” option will be written to the right of the task) and click Further.

7. Complete the rollback process and agree to the prompt to restart your computer.

For Windows 8/8.1 users

Method No. 1

1. Use a keyboard shortcut Win+R and print shutdown.exe /r /o /f /t 00 to activate the advanced startup feature.

2. Select an option System Restore and in the window that opens, click on the item Cancel System Restore. Click Further.

Method No. 2

1. Go to Control Panel and open the parameter Running System Restore.

2. If you have recently performed a system restore, a list of all operations performed will appear in the window that opens. Select the one you want and click Further.

3. Run Scan affected programs to see what changes will be made or undone by the following actions.

4. Complete the undo recovery process and restart your computer.

For Windows 7 users

• Open start menu and start typing System Restore.
• Run the found program.
• Select an option Undo last system restore and press Further.
• Now click Ready to complete the operation.
• Agree to restart your computer.

For Windows XP users

• Open the Start menu and navigate to the following path All Programs > Accessories > System Tools > System Restore.
• Select an option Undo last restore and press the key Further.
• Click Cancel. On at this stage Windows will undo the last system restore and your computer will automatically restart.
• When the reboot is complete, the window that appears System Restore click OK.

Now your computer is ready for full operation!

How to get data back after canceling Windows System Restore

Starus Partition Recovery

Not all computers can back up or retrieve files using large quantities methods found on the Internet. And canceling a system restore does not always lead to the desired result - after all, it can also erase important data.

Is it possible to solve the situation in another way? Definitely yes! However, it is worth remembering one important nuance - files can only be restored if they have not been overwritten.

Any document installed on your HDD remains on it even if you erase it using the Shift + Del combination. The only thing that happens in this case is that the file system forgets the path to the data library. However, such a file can easily be overwritten by new installed data.

The Starus Partition Recovery application, or its cheap analogs with reduced functionality, Starus FAT Recovery, Starus NTFS Recovery, are designed to work with certain file systems - FAT and NTFS. The main software is able to interact with both.

The applications are well suited for both home and office work, becoming a universal tool for recovering information and logical partitions of hard drives.

Use the simple instructions below to help you restore deleted file any format:

1. Launch Starus Partition Recovery. Welcomes you File Recovery Wizard, the autorun of which, if desired, can be canceled later.

2. Select the desired drive or logical partition to scan.

3. Select the appropriate device scan type. By choosing to scan your entire device, you can only scan Full analysis.

Quick Scan— allows you to conduct lightning-fast disk analysis, collecting superficial information about files.

Full analysis— conducts a deep and thorough analysis of each individual sector of the hard drive and collects detailed information about each file.

4. A convenient preview function allows you to carefully examine each file of any format: text document, image and video.

5. To recover lost files, select the ones you need, right-click on any of them and click Restore.

6. Complete the data recovery process.

System Restore is disabled by default—at least on some computers. Meanwhile, this functionality, which allows you to create snapshots of system files for recovery in case of failure, has existed since the days of Windows ME.

However, the ability to create restore points from Windows 10 itself has not gone away, so you can simply enable it if you want to be extra safe. But in general, Windows 10 has other system restore tools, so restore points are no longer so relevant.

Why was System Restore disabled?

Microsoft doesn't explain why System Restore is disabled by default, but you can guess. Restore points require a lot of space, and Microsoft is trying to reduce disk space. Microsoft wants Windows 10 to run on devices with as little as 16GB of internal storage to compete with Chromebooks and cheap Android tablets.

Plus, System Restore is now less of a concern thanks to other Windows 10 tools that let you quickly return your system to a pristine state without reinstalling. For this purpose, the function of returning the computer to its original state is intended, which refreshes Windows without deleting user data.

How to enable System Restore

You can enable System Restore through the Control Panel. Keep in mind that storing restore points will require a lot of space, so you shouldn't do this on cheap laptops and tablets with little internal storage. But for a computer with a large hard drive this is not a problem.

Please note that by default, System Restore is disabled and no restore points are created. Therefore, if you encounter any problem, enabling recovery will no longer help - in any case, there are no restore points created before the problem occurred. And then when turned on it will be created new point recovery – a snapshot of the damaged system. So if you plan to use System Restore, you need to enable it in advance, before problems arise.

This option is only available in the Control Panel—it's not available in the new Settings interface. Most quick way get to settings - enter in the search bar of the Start menu or on the start screen keyword“restore” (in the genitive case; for the English interface – “restore”) and select “Create a restore point” in the search results. Or you can open Control Panel, go to the “System” section and click the “System Protection” link in the sidebar.

In the window that opens, you will see that system protection is disabled for both the system drive and all others. Select your system drive and click the Configure button to enable this feature.

Select the “Turn on system protection” option and specify how much disk space should be reserved for recovery points. The less space, the fewer recovery points will be stored at the same time. Click "OK" to enable System Restore.

To use System Restore in the future, open the same “System Protection” window, click the button, which will now be active, and you can select a restore point.

If Windows won't boot normally, you can boot into Safe Mode and perform System Restore, or run it from the Advanced Options section of the Recovery Environment.

Other ways to solve system problems

If you wanted to use System Restore to solve a problem, but found that it was disabled, you will have to solve the problem in other ways.

If the problem occurs after installing the update, you can try uninstalling it or . This will help troubleshoot any issues that may arise from updates that are not compatible with your hardware or software.

If system files are damaged, you can use it to find and automatically fix errors.

If the problem occurs after installing a program or driver, you can uninstall it through the Control Panel.

If Windows does not boot normally, try booting into Safe Mode. You can also try the options from the “Advanced startup options” section - it is on the screen that appears if Windows 10 cannot boot normally.

There are many other ways to diagnose and troubleshoot problems in Windows 10. However, the most reliable solution is to use the Reset this PC function, which is available in the Settings interface. This will restore the system to factory settings. You will have to install programs and change system settings again, but all your personal data will be saved. This method allows you to eliminate any system problems, since it restores the original state of the system Windows files 10. You can try

If serious problems occur that prevent Windows from booting normally, the built-in wizard usually prompts you to perform a recovery. However, if an error occurs during the recovery itself, the process may go into a loop and the system will start the recovery at each new boot. Certainly, reinstalling Windows will solve the problem, but you will lose everything installed programs. It’s good if you took care of creating a complete backup system, what if there is no such copy?

However, this is not a verdict yet. You can try to "knock" the system out of the recovery cycle using these instructions. All you need is a Windows installation disk and a little attention. After setting the BIOS to boot from external media, insert the disk and boot from it. The Windows Setup menu appears.

Run the bcdedit command in the console that opens.

As a result, you will receive a list of boot options. In the first block " Booting Windows» Find the line resumeobject and copy the identifier located opposite it.

Now run the command bcdedit /set (GUID) recoveryenabled no, replacing (GUID) with your ID.

This will disable automatic recovery and interrupt the cycle. Deactivating the recovery procedure, however, does not eliminate the errors that caused it. Therefore, it is highly advisable to check file system, running in command line chkdsk /r c:.

And if this does not give positive results, you can run the command sfc /scannow aimed at restoring damaged system files.

You can also enable the boot manager, which is called up, as in Windows 7, by pressing F8 immediately after turning on the computer. To do this, in the running console, you need to run the command bcdedit /set (default) bootmenupolicy legacy.

If all this does not help start Windows, you will most likely have to move on to radical options - reinstalling or resetting the system to its original state.